Page 184 Chapter 7
Note: The Password field updates to display the word “Assigned.”
Selecting a connection
Use the Connection setting to select the method you want to use to
connect to your Internet Service Provider or a dial-in server. See
“Connection preferences” earlier in this chapter for information about
creating and configuring connection settings.
To select a connection:
1. Tap the Connection pick list.
2. Tap the connection you want to use.
Adding telephone settings
When you select the Phone field, your organizer opens a dialog box in
which you define the telephone number you use to connect with your
ISP or dial-in server. In addition, you can also define a prefix, disable
Call Waiting, and give special instructions for using a calling card.
Note: The Phone Setup dialog box works correctly for AT&T and
Sprint long-distance services. However, because MCI works
differently, MCI customers need to put the calling card
number in the Phone # field and the phone number in the Use
calling card field.
To enter your server phone number:
1. Tap the Phone field.
Tap here to display
a list of available
connections
To Next Page
Loading...
