- 102 -
The recording lamp lights up during recording.
When this is set to [OFF], it does not light during recording.
The ring LED lights up blue in Motion Picture Recording Mode or Still Picture Recording Mode.
≥ When [5 SECONDS] is set, the ring LED lights up for 5 seconds after the unit is turned on or the
recording mode is switched.
≥ When [RING LED (RED)] is set to [ON], the ring LED does not light up blue during recording.
The ring LED lights up red during recording.
≥ When the [REC LAMP] is set to [OFF], this item cannot be set.
Please refer to page 22.
Time difference from the Greenwich Mean Time can be set. (l 22)
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs, follow the instructions displayed on the screen. (l 111)
[REC LAMP]
[ON]/[OFF]
[RING LED (BLUE)]
[ON]/[5 SECONDS]/[OFF]
[RING LED (RED)]
[ON]/[OFF]
[CLOCK SET]
[TIME ZONE]
[ALERT SOUND]
: Volume low
: Volume high
[OFF]: Cancel the setting.
To Next Page
Loading...
