- 18 -
Set the power switch to ON while pressing the lock release button B to turn on
the unit.
A The status indicator lights on.
≥ To turn on the unit again after the [ECONOMY (BATT)] or [ECONOMY (AC)] is activated, set the
power switch to OFF once, and then to ON again. (l 103)
Operate the mode switch to change the mode to , or .
Preparation
Turning the unit on/off
Preparation
Selecting a mode
Motion Picture Recording Mode (l 27)
Still Picture Recording Mode (l 28)
Playback Mode (l 32, 67)
To turn off the unit
Set the power switch to OFF while
pressing the lock release button.
The status indicator goes off.
To Next Page
Loading...
