Panasonic AG-AC8PJ - Connecting with a HDMI Cable; Connecting with the Component Cable

- 74 -
Connecting with a HDMI cable
Select the desired method of HDMI output.
* This is displayed only in Playback Mode.
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p],
[1080i], [720p] or [480p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
≥ When [HDMI RESOLUTION] is set to [AUTO], an image being recorded in [PM 720/60p] will be
output to the TV in [1080p].
≥ When a scene recorded in [PM 720/60p] is played back on the TV, even if [HDMI RESOLUTION]
is set to [1080p], the scene will be output in [720p].
Connecting with the component cable
Component output setting can be changed.
: [OTHER FUNCTION] # [HDMI RESOLUTION] # desired setting
[AUTO]/[1080p]/[1080i]/[720p]*/[480p]
: [OTHER FUNCTION] # [COMPONENT OUT] # desired setting
[480i]: When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with 1080i.
(Playback is in high definition quality.)
MENU
MENU