- 44 -
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
Select the compensation mode for the time code.
≥ It is automatically set to [NDF] when the Interval Recording is used.
Sets the way the time code will move.
≥ It is automatically set to [FREE RUN] when it is set to PRE-REC.
≥ The time code will reset when the built-in lithium battery is exhausted when it is set to
[FREE RUN].
Recording format Frame
[PS 1080/60p], [PH 1080/60i], [HA 1080/60i], [HG 1080/60i],
[HE 1080/60i], [PM 720/60p], [SA 480/60i]
0 to 29
[TC MODE]
: [RECORD SETUP] # [TC MODE] # desired setting
[DF]: Time code is compensated in accordance with the actual time. It is
mainly used for broadcasting such as TV programs.
[NDF]: It will not compensate the time code. (There will be a difference from
the actual time)
[TCG]
: [RECORD SETUP] # [TCG] # desired setting
[FREE RUN]: It will constantly move.
[REC RUN]: It will move only when recording.
MENU
MENU
To Next Page
Loading...
