- 21 -
Viewfinder adjustment
≥ These settings will not affect the images actually recorded.
It adjusts the field of view to show the image on the viewfinder clearly.
1 Adjust the viewfinder to suit your
vision so that you can see the
display images clearly.
≥ Be careful not to trap your fingers when moving
the viewfinder.
≥ The viewfinder can be lifted vertically up to
approximately 90o.
≥ Close the LCD monitor and turn on the
viewfinder.
2 Adjust the focus by operating the
eyepiece corrector lever.
Brightness of the viewfinder can be switched.
Select the menu. (l 23)
Recording yourself
≥ Change the mode to .
Rotate the LCD monitor towards the lens side.
≥ Displaying during the recording yourself can be
switched by setting [SELF SHOOT]. (l 99)
≥ Only some indications will appear on the screen when the [SELF SHOOT] is set to [MIRROR].
When appears, return the direction of the LCD monitor to normal position and check the
warning/alarm indication. (l 111)
Adjusting the field of view
[EVF SET]
: [SW & DISP SETUP] # [EVF SET] # desired setting
[BRIGHT]/[NORMAL]/[DARK]
A Eyepiece corrector lever
To Next Page
Loading...
