- 104 -
Please refer to page 73.
This function allows you to select how to display images with a 16:9 aspect ratio on a TV with a 4:3
aspect ratio.
Select the desired method of HDMI output. (l 74)
* This is displayed only in Playback Mode.
Component output setting can be changed. (l 74)
Set to [YES] for changing the menu settings back to the default condition.
≥
Settings for [REC FORMAT], [MEDIA SELECT], [CLOCK SET] and [LANGUAGE] will not be changed.
Set the file number of the still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001. (l 89)
≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET].
The version of the firmware of this device is displayed.
[TV ASPECT]
[16:9]/[4:3]
[DOWN CONV.]
[SIDE CROP]/[LETTERBOX]/[SQUEEZE]
[HDMI RESOLUTION]
[AUTO]/[1080p]/[1080i]/[720p]*/[480p]
[COMPONENT OUT]
[480i]/[1080i]
[INITIAL SET]
[NUMBER RESET]
[SYSTEM INFO]
To Next Page
Loading...
