- 49 -
The in-focus area is displayed in red.
≥ The red display does not appear on the images actually recorded.
≥ The red display does not appear on TV.
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
≥ The Fade setting is canceled when the recording stops.
∫ To select the color for fade in/out
≥ The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white saturation
in bright parts at the same time. Both bright and dark parts can be recorded clearly.
≥ If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be
clear.
Focus Assist
Fade
: [SW & DISP SETUP] # [FADE COLOR] #
[WHITE] or [BLACK]
DRS
To Next Page
Loading...
