- 47 -
Setting the Recording Counter
Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE]))
Select the counting method during the recording.
The Recording Counter will be set to 0:00:00 while displaying the counter.
≥ When [COUNTER DISPLAY] is set to an option other than [COUNTER], this item cannot be set.
[REC COUNTER]
: [SW & DISP SETUP] # [REC COUNTER] # desired setting
[TOTAL]: The count continues to increase until the Recording Counter is
resetted.
[SCENE]: Resets the Recording Counter at start of recording. Counts the time
of each recording session.
[COUNTER RESET]
: [RECORD SETUP] # [COUNTER RESET] # [YES]
To Next Page
Loading...
