- 56 -
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
≥ This setting is retained when you change between Motion Picture Recording Mode and
Still Picture Recording Mode.
≥ Switch to Manual Mode. (l 38)
1 Select the menu.
2 Select the desired setting items and press the button in the center.
3 Adjust settings using the cursor button right or left.
4 Select [ENTER] and press the button in the center.
≥ Select [EXIT] and press the button in the center or press the MENU button to complete the
settings.
≥ appears on the screen.
[PICTURE ADJUST]
: [CAMERA SETUP] # [PICTURE ADJUST]
[SHARPNESS]: Sharpness of the edge
[COLOR]: Depth of the color of the image
[EXPOSURE]: Brightness of the image
[WB ADJUST]: Picture color balance
MENU
To Next Page
Loading...
