- 88 -
∫ To disconnect USB cable safely
(If using Windows)
Select the icon in task tray displayed on the PC, and then click [Eject AVCCAM
Handheld].
≥ Depending on your PC’s settings, this icon may not be displayed.
(If using Mac)
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
About the screen indication of the unit
≥ Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card
access icon ( ) appears on the unit screen.
≥ If the screen does not change when the unit is operated while connected to a PC, disconnect
the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC
adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be
destroyed when above operation is performed while accessing the SD card.)
To Next Page
Loading...
