- 66 -
When recording, the input level from the built-in microphones and the external microphone terminal
can be adjusted.
1 Select the menu.
2
(When [SET ]/[SET ] is selected)
Adjust the microphone input level
using the cursor button right or left.
≥ Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise,
the sound is distorted.) Select a lower setting for
microphone input level.
3 Select [ENTER] and press the button in
the center.
≥ Select [EXIT] and press the button in the center to
complete the setting.
≥ When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
≥ The microphone input level meter shows the larger of the inputs from the 2 built-in microphones.
≥ You cannot record with the audio completely muted.
This function reduces the low-pitched sound when using an external microphone.
≥ Switch to Manual Mode. (l 38)
≥ This function can be set only when using an external microphone.
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: ALC is activated, and the recording level is adjusted automatically.
[SET ]: The desired recording level can be set. ALC is activated, and sound
distortions are reduced.
[SET ]: The desired recording level can be set. Sounds are recorded in
natural quality.
MENU
A Left
B Right
C Microphone input level
ALC
[LOWCUT]
: [RECORD SETUP] # [LOWCUT] # [ON]
MENU
To Next Page
Loading...
