- 69 -
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
If playback of a motion picture is stopped, appears on the thumbnail view of the stopped
scene.
≥ The memorized resume position is cleared if you turn off the unit or change the mode. (The
setting of [RESUME PLAY] does not change.)
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1 Select the date select icon and press the
button in the center.
2 Select the playback date and press the button in the center.
The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3 Select the scene or the still picture to be played back and press the button in
the center.
≥ Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode is
changed.
≥ In cases such as those described below, scenes and still pictures are grouped separately on the
date list, and –1, –2… may be added after the date:
j When the number of scenes exceeds 99
j When the number of still pictures exceeds 999
j When [REC FORMAT] is changed
j When [TIME LAPSE REC] is used
j When [ASPECT] is changed
j When [NUMBER RESET] is performed
≥ The following scenes and still pictures are grouped separately on the date list, and icons are
displayed according to the category:
j Still pictures created from motion pictures:
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
MENU
PH
PH HA
PH HA
HG
HE SA SA
101010 111111 121212
131313 141414 151515
161616 171717 181818
To Next Page
Loading...
