- 45 -
You can set the initial time code.
1 Select the menu.
2 Select the item to set using the cursor button right or left, then
adjust the value using the cursor button up or down.
≥ “h” is an abbreviation for hour, “m” for minute, “s” for second and “f” for frame.
3 Select [ENTER] using the cursor button right or left, then press the
button in the center.
≥ Select [EXIT] and press the button in the center to complete the setting.
≥ This unit will adjust the time code in accordance with the frame rate of the recording format.
(l 59) Therefore, it may not be continuous from the previous final time code when the recording
format is changed.
[TC PRESET]
: [RECORD SETUP] # [TC PRESET]
To Next Page
Loading...
