Panasonic AG-AC8PJ - Page 93

- 93 -
Sets the way the time code will move. (l 44)
Initial value of the time code can be set. (l 45)
User Information can be set. (l 46)
You can change a counter display that indicates how much time has elapsed during recording or
playback. (l 43)
Set the Recording Counter to 0:00:00. (l 47)
This allows recording of the pictures and sound to start approximately 3 seconds before the
recording start/stop button is pressed. (l 50)
You can select the Optical Image Stabilizer setting. (l 37)
The higher the number of pixels, the higher the clarity of the picture when printing. (l 63)
[TCG]
[FREE RUN]/[REC RUN]
[TC PRESET]
[UB PRESET]
[COUNTER DISPLAY]
[TC]/[UB]/[COUNTER]/[OFF]
[COUNTER RESET]
[PRE-REC]
[ON]/[OFF]
[O.I.S.]
[MODE1]/[MODE2]
[PICTURE SIZE]
(Motion Picture Recording Mode)
//
(Still Picture Recording Mode)
///////
/
9.4
M
2.1
M
1.4 M
15.1
M
5.8 M
0.3 M
15.1
M
8
M
2
M
20.4
M
9.4
M
2.1
M