Panasonic AMK3003P74 - Page 8

7
<For 7.5kW or below>
※
4
※
4
AS
BT
AR
AQ
AO
AN
AP
��
<For 11kW/15kW>
BT
BK
AS
AP
AO
AN
AP
AQ
BL
BM
BN
AR
1
Operation panel unit
AM
Mounting holes
2
Waning label
AN
Terminal cover
3
Enlosure
AO
Cover for option unit connection
4
Rating nameplate(※1)
AP
Fixing screw for terminal casing
5
Heat sink
AQ
Terminal casing for main circuit
6
Inlet hole for main circuit wire
AR
Cover of connector for cooling fan(※2)
7
Inlet hole for control wire
AS
Cooling fan(※2)
8
Port for connecting option unit(RJ45)

Casing of Cooling fan(※2)
9
Terminal block for control circuit (signal input/output)
K
Internal component cooling fan (※3)
A
Terminal block for control circuit (relay output)
L
Casing of internal component cooling fan (※3)
AK
Terminal block for main circuit
M
Fixing screw for casing of internal component cooling fan (※3)
AL
Ground terminal
N
Wiring nameplate
※1 Check that the rating nameplate confirms to your order.
※2 Models less than 0.75 kW are not equipped with cooling fan (equipped with item
18 and 20 ).
※3 11kW and 15kW models are equipped with internal cooling fans (item 21, 22
and 23).
※4 5.5kW and 7.5kW models are equipped with 2 fans.