ENGLISH
- 28 (E) -
Connection to the RCU (AW-RC600) is made through
the optional RCU cable AW-CA50A26.
1. Turn RCU power off before connecting cables.
2. Connect the 50-pin connector of the RCU cable to
the I/F REMOTE Connector of the camera.
3. Turn RCU power on and the power indicator lamp
will light. The camera can now be remote controlled
by the RCU.
Notes:
• The maximum extension distance between the
camera and AW-RC600 is 100 m.
• Use the following options for cable extension.
Studio Cable WV-CA26U15 (15 m/50 ft)
WV-CA26U30 (30 m/100 ft)
WV-CA26U100 (100 m/330 ft)
Cable Joint Adapter
WV-CA26T26
w CONNECTION OF A REMOTE CONTROL UNIT (RCU)
AW-RC600
RCU Cable
AW-CA50A26 (15 m)
To Next Page
Loading...
