74
Name Function
(7) Preset and Brightness
[Note]
Brightness is only
enabled when [Scene]
is set to [Scene1] or
[Scene2].
Select a preset number or home position from the drop-down
list.
Click [Move] to go to a previously-configured preset position.
Using
to adjust the unit position and click
[Set] to register the preset position.
(Auto brightness)
Auto
Use this to switch the brightness adjustment between
auto and manual.
Green
Auto
indicates that the brightness is adjusted
automatically.
White
Auto
indicates that the brightness is adjusted
manually.
(Manual brightness)
-
Use this to make the image darker.
It does not work during automatic adjustments.
+
Use this to make the image lighter.
It does not work during automatic adjustments.
Switch the speed while manually adjusting the
brightness.
It does not work during automatic adjustments.
If you click on a part of the area where the live screen image is displayed, pan / tilt will operate so that the clicked
position is in the center.
To Next Page
Loading...
