Panasonic BB-HCM311

Operating Instructions
139
2.25 Stop the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Note
• You can confirm the SD memory capacity on the Status page (see page
146).
• If the camera is restarted (see page 148), the SD memory recording starts
again.
• If you remove the SD memory card and insert it again, the SD memory
recording starts again (see page
157).
1. Click [Trigger] on the Setup page.
2. Click [SD video recording stop].
3. Click [OK] on the confirmation window.
• The SD memory recording is stopped.
4. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
Ensure that recording has stopped before removing the SD memory card. Do
not remove the SD memory card, nor restart or turn off the camera while
recording images on the card. Doing so can cause a decrease in SD memory
card capacity, data corruption or camera malfunction.