Panasonic BB-HCM311

Operating Instructions
140
2.26 Start the SD Memory Recording
The SD memory recording can be started on the Trigger page.
Note
• You can confirm the SD memory capacity on the Status page (see page
146).
• If the camera is restarted (see page 148), the SD memory recording starts
again.
• If you remove the SD memory card and insert it again, the SD memory
recording starts again (see page
157).
1. Click [Trigger] on the Setup page.
2. Click [SD video recording start].
• "SD video recording was started." is displayed.
3. Click [Go to Trigger page].
• The Trigger page is displayed.
Note
Ensure that recording has stopped before removing the SD memory card.
(See page
139) Do not remove the SD memory card, nor restart or turn off the
camera while recording images on the card. Doing so can cause a decrease
in SD memory card capacity, data corruption or camera malfunction.