Operating Instructions
145
3 Camera Maintenance
3.1 Maintenance page
Maintenance
(1) Status Displays the camera settings and status (see page 146).
(2) Session Status Displays information on access to the camera (see page
146).
(3) Alarm Log Displays alarm logs (see page 147).
(4) Restart Restarts the camera (see page 148).
(5) Update Firmware Updates the camera firmware (see page 149).
(6) Save Settings Creates a configuration file (see page 152).
(7) Load Settings Loads settings from a configuration file (see page 153).
(8) Reset to Factory
Default
Resets the camera to its default settings (see page 154).
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
To Next Page
Loading...
