Operating Instructions
95
2.15 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
1. Click [Trigger] on the Setup page.
2. Click No. to enable buffer/transfer.
3. Check [Enable Image Buffer/Transfer], and select [Timer] for trigger, and click
[Next>].
Note
• Click [Delete Buffered Images] to delete the buffered images.
• Click [Save] to save the settings.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
To Next Page
Loading...
