Operating Instructions
78
2.9 Setting Date and Time
The Date and Time page allows you to set date and time. Date and time are used
for each image (Single, Multi and Buffered), Trigger, Alarm Log and Operation
Time.
Note
Saving the date and time settings deletes all buffered images on the internal
memory. The buffered images on the SD memory card are not deleted.
1. Click [Date and Time] on the Setup page.
2. Set each parameter.
• Set [Automatic Time Adjustment] to synchronize the time automatically
with an NTP server.
• Clicking [Cancel] cancels your settings without saving changes.
To Next Page
Loading...
