Operating Instructions
29
1.2.1 Auto Centering the Image (Click to Center)
Using your mouse, click any portion of the camera image. As long as it is within the
pan/tilt range of the camera, the image will automatically move to place the
selected point in the center of the screen.
1. Move the cursor to the desired point.
2. Click it.
• The clicked point is centered.
• See page 32 for the pan/tilt operation.
Note
• When using the digital zoom feature, the Click to Center feature is
available.
• When End Display appears on the operation bar, Click to Center does not
work beyond the pan/tilt end (see page
31).
• The clicked position may slightly miss the center depending on the lens
direction.
• If Click to Center is not permitted on the General User page (see page 92),
Click to Center does not work.
Cursor
To Next Page
Loading...
