29
5.3.3 Quick Guide
5.3.3.1 Basic Operation
1
Press
to start/stop the
operation.
POWER
2
Press
to select either
mode, set temperature, fan speed or
air swing section.
• Use or to select setting.
• Press
to confi rm the selection.
Mode section
Default setting for Mode is Auto.
DRY
AUTO HEAT
COOL
Set temperature section
Selection range:
16.0 °C ~ 30.0 °C / 60 °F ~ 86 °F.
Fan speed section
• When FAN AUTO is selected, the fan
speed is adjusted automatically according
to the operation mode.
• Select the lowest fan speed to have a low
noise operation.
AUTO
Air swing section
• Do not adjust the fl ap by hand.
* For details operation, refer “To Learn
More....”
Up/Down Air Swing
Left/Right Air Swing
12:00,Mon
SET TEMP.
FAN SPEED
25
.0
FLAP
AUTO
AUTO
MODE
AUTO
1
2
To Next Page
Loading...
