92
14.5 Quiet Operation (Cooling)
Purpose
o To provide quiet cooling operation compare to normal operation.
Control condition
o Quiet operation start condition
When operation is selected. will be shown on remote control display.
o Quiet operation stop condition
Quiet is disable when fan speed is changed or Powerful is enable.
When quiet operation is stopped, operation is shifted to normal operation with previous setting.
When operation mode is change, quiet operation is shifted to quiet operation of the new mode.
During quiet operation, if timer “ON” activates, quiet operation maintain.
After OFF, when ON back, quiet operation is memorized.
Control content
o Fan speed is changed to QLo.
14.6 Quiet Operation (Heating)
Purpose
o To provide quiet heating operation compare to normal operation.
Control condition
o Quiet operation start condition
When operation is selected. will be shown on remote control display.
o Quiet operation stop condition
Quiet is disable when fan speed is changed or Powerful is enable.
When quiet operation is stopped, operation is shifted to normal operation with previous setting.
When operation mode is change, quiet operation is shifted to quiet operation of the new mode.
During quiet operation, if timer “ON” activates, quiet operation maintain.
After OFF, when ON back, quiet operation is memorized.
Control contents
o Fan speed is changed to QLo.
14.7 Powerful Operation
Purpose
o To achieve the setting temperature quickly.
Control condition
o Powerful operation start condition
When is selected. Will be display on remote control display.
o Powerful operation stop condition
Powerful operation will be disable after 20 minutes.
Powerful operation will be disable when fan speed is changed and Quiet operation is enable.
Control contents
o When powerful mode is selected, the internal setting temperature will shift lower up to 2°C (for Cooling) or
higher up to 3.5°C (for heating) than remote control setting temperature for 20 minutes.
To Next Page
Loading...
Need help?
General
