2.0 Features Update Appendix A
A-24 DBS 824-3.0/3.2-700 Revised April 2000
4. Rotate the desk stand 180°. In this position it doubles as a wall mount bracket.
5. Insert the wall mount bracket into the mounting guides as shown in Figure 8.
6. Slide the wall mount bracket onto the telephone.
Figure 8. Inserting the wall mount bracket (rotated desk stand)
7. While viewing the front of the telephone, find the handset guide located just below the
hookswitch (see Figure 8).
8. Slide the handset guide out, rotate 180° so that the holding clip is exposed, and reinsert.
Figure 9. Handset guide insertion for wall mounting, key telephone
Step 5
Step 6
To Next Page
Loading...
