*When press OPEN/CLOSE key while the tray
being locked.
Display “LOCK” for 3 seconds.
Press [OPEN/CLOSE]
key while the tray being
locked.
ATP re-execution Re-execute ATP. Display at ATP executing.
When the power is on (E-
E mode), press [CH UP]
and [CH DOWN]
simultaneously for five
seconds.
Progressive initialization The progressive setting
is initialized to Interlace.
The display before execution leaves.
When the power is on (E-
E mode), press [STOP]
and [TIME SLIP]
simultaneously for five
seconds.
Aging Contents (Example):
TOP PREVIOUS NEXT
To Next Page
Loading...
