Panasonic DMR-E53EG - Page 39

White Picture Output White picture is output as
component Output from AV
Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/
Progressive by “I/Pswitch: [1]
[4]”
*Initial mode is “Interlace”.
Press [1] [1] in
service mode.
Switch Interlace/Progressive
Press [1] [4] in
White Picture
Output mode.
*I/P are switched
alternately.
Magenta Picture
Output
Magenta picture is output with
Component Output from AV
Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/
Progressive by “I/Pswitch: [1]
[4]”
*Initial mode is “Interlace”.
Press [1] [2] in
service mode.