Switch Interlace/Progressive Press [1] [4] in
Magenta Picture
Output mode.
*I/P are switched
alternately.
RTSC Return in XP
(A & V)
AV1 input signal is encoded
(XP), decoded (XP) and output
decoded signal to external
without DISC recording and
DISC playback.
Initial mode: EE2/ Interlace/ XP/ Audio 48kHz
Press [1] [3] in
service mode.
Switch Interlace/Progressive
Press [1] [4] in
RTSC Return XP
mode.
*I/P are switched
alternately.
Audio 44.1 kHz/ 48 kHz Switch
Press [2] [4] in
RTSC Return XP
mode.
*48 kHz / 44.1 kHz
are switched
alternately.
I/P Switch Switch Interlace and
Progressive in EE mode.
*Initial setting is “Interlace”.
*This command is effective
during executing “White
Picture Output”,
“MagentaPicture Output” and
“RTSC Return in XP (A & V)”
modes.
Initial mode is Interlace
Switch Interlace/Progressive
Press [1] [4] in I/P
Switch mode.
*I/P are switched
alternately.
Audio Mute
(XTMUTE)
Check whether mute is applied
normally by the timer
microprocessor.
Press [2] [1] in
service mode.
Audio Mute
(XDMUTE)
Check whether mute is applied
normally by the Digital P.C.B.
(GLUE IC).
Press [2] [2] in
service mode.
To Next Page
Loading...
