Audio Pattern Output The audio pattern stored in the
internal memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching
operation of DAC can
beconfirmed by sub command
[2] [4].
Initial mode (Audio 48kHz)
Press [2] [3] in
service mode.
Audio 44.1kHz/48kHz switching
Press [2] [4] in
Audio Pattern
Output mode.
*48 kHz / 44.1 kHz
are switched
alternately.
Laser Used Time
Indiction
Check laser used time (hours)
of drive.
•(*****) is the used time display in hour.
•Laser used time ofDVD/ CD in Playback/
Recording mode is counted.
Press [4] [1] in
service mode.
Delete the Laser Used
Time
Laser used time stored in the
memory of the unit is deleted.
Press [9] [5] in
service mode.
RAM Drive Last Error RAM Drive error code display.
*For details about the drive
error code, refer to the Service
Manual for the specific RAM
Drive.
*Details are described in “ 7.
Service Explorer ”.
1. Error Number is displayed for 5 seconds.
2. Time when the error has occurred is displayed
for 5 seconds.
Y: Year
MM: Month
DD: Day
hh: Hour
mm: Minute
ss: Second
3. Last Drive Error (1/2) is displayed for 5 seconds.
4. Last Drive Error (2/2) is displayed for 5 seconds.
Press [4] [2] in
service mode.
Then press [0] [1] ~
[9] [9], the past 99
errors are displayed.