Tray OPEN/CLOSE
Test
The RAM drive tray is opened
and closed repeatedly.
“*” is number of open/close cycle times.
Press [9] [1] in
service mode
*When releasing
this mode, press the
[POWER] button
on Front Panel
more than 10
seconds.
Error code
initialization
Initialization of the last error
code held by timer (Write in
F00)
Press [9] [8] in
service mode.
Initialize Service Last Drive Error, Error history
and Error Codes stored on the
unit are initialized to factory
setting.
Press [9] [9] in
service mode.
Finishing service mode Release Service Mode. Display in STOP (E-E) mode.
Press power button
on the front panel in
service mode.
TOP PREVIOUS NEXT
To Next Page
Loading...
