Panasonic DP-1810F

Password Communications
104
To set the transmission password and parameter,
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. You can change the setting temporarily by using FUNCTION 8-4 (PASSWORD-XMT) for each
transmission. See page 106 for details.
2. To change the password, press in step 4. Then re-enter a new one.
Setting Password Transmission
1
SET MODE (1-4)
ENTER NO. OR
∨∧
2
FAX PARAMETER(1-99)
NO.=
❚
3
43 PASSWORD-XMT
❚❚❚❚
4
Enter a 4-digit Transmission Password.
Ex: and press
43 PASSWORD-XMT
1:OFF 1234
5
for “OFF” (password is not checked)
or
for “ON” (password is checked)
43 PASSWORD-XMT
1:OFF 1234
or
43 PASSWORD-XMT
2:ON 1234
6
1
2
3
4
SET
.
CLEAR