Panasonic DP-1810F

Customizing Your Machine
29
Programming Your Machine
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST 1 Lightest Setting the home position for the CONTRAST.
2 Lighter
3Normal
4Darker
5 Darkest
002 RESOLUTION 1 Standard Setting the home position for the RESOLUTION.
2Fine
3S-Fine
003 ORIGINAL 1 TEXT Setting the home position for the ORIGINAL.
2 TEXT/
PHOTO
3PHOTO
004 STAMP 1 Off Setting the home position for the STAMP.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2On
005 MEMORY 1 Off Setting the home position for the MEMORY.
2On
006 DIALLING METHOD 1 Pulse Selecting the dialling method.
2Tone
007 HEADER PRINT 1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2Outside
3 No print
008 HEADER FORMAT 1 Logo, ID No. Selecting the header format.
2From To
009 RCV'D TIME PRINT 1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received document.
2Valid
010 KEY/BUZZER
VOLUME
1 Off Selecting the volume of the Key/Buzzer tone.
2Soft
3 Loud
012 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/Inc. only.
Off : Does not print
Always : Always prints
Inc. only : Prints only when communication has failed.
2Always
3Inc. only
013 AUTO JOURNAL
PRINT
1 Invalid Selecting whether the machine prints the journal
automatically after every 100 transactions.
2Valid
014 FILE ACCEPTANCE
REPORT
1 Invalid Selecting whether the machine prints the file acceptance
journal.
If you set this parameter to valid, a journal will print out
after any memory communication.
2Valid
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
2Auto