15
Installing Your
Machine
Adjusting the Volume
You can adjust the monitor and ringer volume on your machine. The built-in speaker enables you to hear the
dial tone, dialling signals, and busy tone. The ringer sounds when your machine receives a call.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. You can also adjust the volume of the key touch tone and the volume of the buzzer in the Fax
Parameter No. 10 (KEY/BUZZER VOLUME). (See page 29)
General Description
Setting the Monitor Volume
1
You will hear the dial tone through the speaker.
* MONITOR *
❚
2
repeatedly to raise the volume.
or
repeatedly to lower the volume.
MONITOR VOLUME
LOW [
❚❚❚❚❚❚❚❚
]HIGH
MONITOR VOLUME
LOW [
]HIGH
3
To Next Page
Loading...
