Password Communications
105
Network Features
To set receiving password and parameter,
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. Once you set the parameter, you cannot select the parameter, “OFF” or “ON”, for each
reception. It is always “OFF” or “ON” until you change the setting.
2. To change the password, press in step 4. Then re-enter a new one.
Setting Password Reception
1
SET MODE (1-4)
ENTER NO. OR
∨∧
2
FAX PARAMETER(1-99)
NO.=
❚
3
44 PASSWORD-RCV
❚❚❚❚
4
Enter a 4-digit Transmission Password.
Ex: and press
44 PASSWORD-RCV
1:OFF 1234
5
for “OFF” (password is not checked)
or
for “ON” (password is checked)
44 PASSWORD-RCV
1:OFF 1234
or
44 PASSWORD-RCV
2:ON 1234
6
1
2
3
4
SET
.
CLEAR
To Next Page
Loading...
Need help?
General
