88
Receive To Memory
This feature is used to secure all received documents by storing them into the memory. To print out the
document from memory, the authorized operator must enter the correct password.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
General Description
Setting the RCV To Memory Password
1
SET MODE (1-4)
ENTER NO. OR
∨∧
2
FAX PARAMETER(1-99)
NO.=
❚
3
37 RCV TO MEMORY
❚❚❚❚
4
Enter a 4-digit RCV to Memory Password.
Ex:
37 RCV TO MEMORY
1234
5
1
2
3
4
To Next Page
Loading...
