Sub-Addressing
118
Using One-Touch/ABBR. Number Dialling
The operation is the same as for normal dialling
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
To send a Document with Sub-address
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
Place a book or an original face down on the Platen Glass.
Press to select the original size.
2
Ex:
<01>(Station name)
5551234s2762
3
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
* STORE * NO.001
PAGES=001 01%
1
2
ORIGINAL SIZE
01
To Next Page
Loading...
Need help?
General
