Program Keys
75
Advanced
Features
To set a Program Key for normal polling
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
Setting for Normal Polling
1
PROGRAM (1-4)
ENTER NO. OR
∨∧
2
PROGRAM[P ]
PRESS PROGRAM KEY
3
Ex:
PROGRAM[P1] NAME
ENTER NAME
4
Enter the station name (up to 15 characters) by using the
Character keys. (See page 17)
Ex: PROG.A and
PROGRAM[P1]
PRESS FUNCTION KEY
5
POLLING
PASSWORD=
❚❚❚❚
6
Enter a 4-digit polling password.
Ex: and press
The polling password appears if it has been previously
set.
ENTER STATION(S)
THEN PRESS START
7
Enter the station by any combination of the following
methods:
• One-Touch Dialling
• Abbreviated Dialling
• Directory Search Dialling, press after each
station is entered
(For details, see page 39 to 43.)
Ex:
<01>(Station name)
5551234
8
You can now set other Program Keys by repeating the
procedures from Step 3, or return to standby by pressing
.
PROGRAM[P ]
PRESS PROGRAM KEY
P1
SET
1 1 1 1
SET
SET
01
STOP
To Next Page
Loading...
