Sending Documents
39
Memory Transmission
Basic Operations
Manual Number Dialling
To dial the telephone number manually, follow the steps below.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
Place a book or an original face down on the Platen Glass.
Press to select the original size.
2
Make sure that the MEMORY lamp is on.
If not, press to set "On".
3
Enter a telephone number from the keypad.
Ex:
TEL. NO.
5551234
❚
1
2
ORIGINAL SIZE
M2/ MEM XMT
M2/MEM XMT
5 5 5 1 2
3
4
To Next Page
Loading...
