Panasonic FP Web-Server - Page 178

FP Web-Server V2.11
15.4 IP and TCP/ IP
167
The participants (Computers, Units, FP Web-Server...) are distinguished by the last
number (1 to 254), e.g. 192.168.206.1 to 192.168.206.254.
In case this network is connected to a second network via a gateway (e.g. the
computer for configuration might be in this network), the gateway address also
needs to be specified, e.g.:
Computer in x.y.206.z Network with Netmask 255.255.255.0, using the x.y.206.1
Gateway.
FP Web-Server in x.y.60.z
The network should have the following settings:
- IP Add=x.y.60.31
- Netmask=255.255.255.0
- Gateway=x.y.60.1
B) In case the FP Web-Server should be connected to an existing network, the following
data must be asked from the network administrator:
- Is there a DHCP-Server in the network? If NOT:
- IP address: Which fixed IP address can be assigned to the FP Web-Server?
- Netmask: How is the network address set up (length of the network address and/
or the participant's address)?
- Gateway: What is the gateway's IP address? (0.0.0.0 if there is no gateway to be
used).
For more detailed information refer to the online help under the keyword "TCP/ IP Setup for
Configurator/Browser Operations via LAN".