Panasonic FP Web-Server - Generalities on How to Get Started

First Steps
FP Web-Server V2.11
32
3.1 Generalities on How to Get Started
For an initial demo of the FP Web-Server's http function, you can access the Panasonic Internet
demo unit. To carry out the test, you need an Internet browser.
Please enter the following address: "http://62.134.44.202/" (second demo unit:
http://62.134.44.204/)
In the following, putting the FP Web-Server into operation for the first time is described.
The subsequent step-by-step example depicts the general configuration and use of the
Web-Server for displaying HTML pages.
To expand upon this example with email functions, refer to Email Functions of the FP
Web-Server (see page
56).
For details on programming the email support on the PLC, refer to PLC Program with Function
Block from the Library M_CE_Lib (see page
61).
For further information, refer to Ethernet/ RS232C Ports (see page
104).