6-35
6.9.2 Performance Specifications (GT32)
Blue-white STN monochrome LCD
75000 hours (at 25 C)
Note4)
50000 hours (at 25 C)
Note4)
Can be adjusted on the menu
screen.
Analog touch switch (resistive film type)
1 million times or more (at 25 C)
Note1)
Connecting a computer to Ethernet port or USB port and our PLC to
COM port enables the communication between the PLC and the
computer.
Note6)
Screen data (base, keyboard,
login), Flow display data, FP
monitor screen data: 2048 kbytes
Screen data (base, keyboard,
login), Flow display data,
Sound function, FP monitor
screen data: 12288 kbytes
Note5)
Recipe data: 64 k bytes
Write device data: 64 kbytes
Alarm history + Line graph sampling (27.5 kbytes)
Logging data of Logging function (64 kbytes)
Hold GT Device (2048 + 255 words)
Hold PLC Device (24 words)
Built-in clock data
Alarm history data
Line graph sampling data
Logging data of Logging function
Internal device hold data
Hold PLC Device data
Approx. 5 years (at 25 C)
Approx. 3 years (at 25 C)
Note1) The touch position may shift due to aging variation. If the touch position has shifted greatly,
please adjust it.
Note2) A battery is necessary for SRAM backup.
The unused part of 27 kbytes for Alarm history and line graph sampling can be used for the
logging function.
Note3) Please purchase a battery separately.
The battery life is the value when no power at all is supplied. The actual lifetime may be shorter
according to the condition of use.
Note4) The backlight life varies depending on the usage environment such as temperature, humidity or
operating voltage.
Especially, if it is used at low temperatures, the life will be extremely short.
Note5) The sound output function is available for GT32T1 only.
Note6) An Ethernet port is available for GT32T1 only.
To Next Page
Loading...
