Panasonic GT32-R

6-38
Ethernet port (GT32T1 only)
Item
Specifications
GT32T1
Communication standard
IEEE802.8u/100BASE-TX IEEE802.3/10BASE-T
Note1)
Connector shape
Plug-in phone jack
Note2)
Transmission distance
Max. 100 m
Applicable cable
UTP cable (Unshielded wire) Category 5
Note3)
Auto MDI-X
Supported
SPEED lamp
Light on: During 100BASE-TX communication
Blinking: During 10BASE-TX communication
LINK/ACT lamp
Light on: When linked
Blinking: During data reception.
Note1) Data processing in the main unit is carried out with the serial communication of 115.2 kbps.
Note2) Take care of handling of the connector not to add an excessive static electricity on the metal part
of the connector.
Note3) Do not use a STP cable (shielded wire).
Note4) Ethernet is a trademark of Xerox Corporation, USA.
Note5) Simultaneous communication with the USB port is not achievable.
SD memory card slot
Item
Specifications
Support media
We recommend SLC SD memory cards and SLC SDHC memory cards.
For details on operation confirmed SD memory card and SDHC
memory card, visit
“https://industrial.panasonic.com/ac/e/fasys/information/sd-
card/index.jsp”.
Supported format standard
Conforms to SD standard.
(Please download formatting software for SD memory cards from the
SD Association website.)
Note1) Check the usable temperature range of a SD memory card to be used before use.
Note2) The SD access lamp turns on while accessing the SD memory card.
6.9.5 Sound Output Specifications (GT32T1 Only)
Item
Specifications
GT32T1
File format
WAV format (PCM format, sampling 8 KHz, 16 bits monaural)
Max. sound data capacity
512 kbytes (Approx. 30 seconds)
Max. registered No. of
sound data
128
Sound output voltage
2 Vp-p
Output terminal
3.5 stereo mini jack
Connecting amplifier
Input impedance 10 k or more