- 35 -
You can change the operation icons to display in the Touch Menu.
Register 3 favourite operation icons.
≥ The default settings are, (Fade), (PRE-REC) and (Video Light) for Motion
Picture Recording Mode, and (Built-in flash), (Self-timer) and (Backlight
Compensation) for Still Picture Recording Mode.
1 Touch [SELECT OPERATION ICONS].
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
≥ Name of the function is displayed by touching and holding on the operation icon.
≥ To cancel, touch the operation icon again.
4 Touch [ENTER].
≥ For details about the function of each operation icon, refer to page 47.
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
* It is not displayed in the Manual Mode or in the Playback Mode.
≥ When the AC adaptor is in use, the LCD monitor is set to automatically.
≥ Recordable time with the battery is shortened when the LCD is made brighter.
It adjusts brightness and colour density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Touch [LCD SET].
2 Touch the desired setting item.
3 Touch / to adjust settings.
4 Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
[SELECT OPERATION ICONS]
[POWER LCD]
////
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)/
*(Automatic adjustment)
[LCD SET]
[BRIGHTNESS]: Brightness of the LCD monitor
[COLOUR]: Colour level of the LCD monitor
A
To Next Page
Loading...
