55
VQT1U19
HD hi-speed burst
shooting
72 still pictures are recorded at a rate of 25 per second.
Use this function to record an object with fast movement.
! The intelligent auto mode is set to [OFF]. ( 46)
1 Select the menu. ( 24)
[RECORD SETUP] ![HI-SPEED BURST] [ON]
2 Press the button.
! Up to 72 still pictures can be taken in burst mode. ([ ] flashes in
red during recording.)
3 Select the setting to save with the cursor
button and press the cursor button.
[REC ALL]:
All pictures are stored.
[SELECT]:
Pictures in the selected range are stored.
[DEL ALL]:
No picture is stored.
! Select the thumbnail on the right bottom of the screen with the
cursor button and move the cursor button right to display the next
page.
4 (Only when the [SELECT] is selected)
Select the range of pictures that will be stored.
Start point
*
! Finish point
* Only select the picture for start point if only 1 picture is to be
stored.
Confirmation message is displayed when [REC] is selected and the
cursor button is pressed after selecting the start point and the finish
point.
Select [YES] and press the cursor button.
Function Effect/Setting method
To Next Page
Loading...
