Panasonic KT4H - OUT2 Heating;Cooling: Reverse Action; OUT2 Heating;Cooling Control Options Setup; OUT2 Reverse Action with Relay Output (OUT1); OUT2 Reverse Action with Non-Contact Output (OUT1)

31
Heating P-band Dead band (Cooling P-band)
Control action
(Cooling
action)
Heatng
action
Cycle action is performed according to deviation.
Relay contact
output (OUT1)
Non-contact
voltage output
(OUT1)
Changes continuously according to deviation.
DC current
output (OUT1)
Unlit
Indicator
(OUT1)
Lit
OFF
ON
SV setting
OFF
ON
7
+
8
-
12V DC
7
+
8
-
12/0V DC
7
+
8
-
0V DC
7
+
8
-
20mA DC
7
+
8
-
20 to 4mA DC
7
+
8
-
4mA DC
888
777
6 6 6
5 5 5
(OUT2)
5
+
6
-
12V DC
5
+
6
-
12/0V DC
5
+
6
-
0V DC
Indicator
(OUT2)
Cycle action is performed according to deviation.
Cycle action is performed according to deviation.
Cycle action is performed according to deviation.
Lit
Unlit
Non-contact
voltage output
Relay contact
output (OUT2)
11.5 OUT2 (Heating/Cooling control) action [Reverse (Heating) action]
Heating/Cooling control can be used
by adding Heating/Cooling control
option.
Heating proportional band can be
set during [6] OUT1 proportional band
setting, and cooling proportional band
can be set during [7] OUT2 proportional
band setting in the Sub setting mode.
(p.14)
[48] Direct/Reverse control can be
set in the Setup mode. (p.21)
: Acts ON (lit) or OFF (unlit).
: Represents Heating control
action.
: Represents Cooling control
action.
11.6 OUT2 (Heating/Cooling control) action [Reverse (Heating) action] (When setting dead band)
Heating/Cooling control can
be used by adding Heating/
Cooling control option.
Heating proportional band can
be set during [6] OUT1
proportional band setting, and
cooling proportional band
can be set during [7] OUT2
proportional band setting in the
Sub setting mode. (p.14)
Dead band can be set during
[36] Overlap band/Dead band
setting in the Setup mode.(p.19)
[48] Direct/Reverse control can
be set in the Setup mode. (p.21)
: Acts ON (lit) or OFF
(unlit).
: Represents Heating
control action.
: Represents Cooling
control action.
Control
action
Heating P-band
(Cooling P-band)
Heating
action
(Cooling
action)
Relay contact
output (OUT2)
Non-contact
voltage output
(OUT1)
Changes continuously according to deviation.
DC current
output (OUT1)
20 to
Cycle action is performed according to deviation.
OFF
ON
SV setting
OFF
ON
888
777
(OUT1)
7
+
8
-
12V DC
7
+
8
-
12/0V DC
7
+
8
-
0V DC
7
+
8
-
20mA DC
7
+
8
-
4mA DC
7
+
8
-
4mA DC
5
+
6
-
12V DC
5
+
6
-
0V DC
5
+
6
-
12/0V DC
Non-contact
voltage output
(OUT2)
Relay contact
output (OUT1)
Indicator
(OUT2)
Indicator
Unlit
Lit
Unlit
Lit
Cycle action is performed according to deviation.
Cycle action is performed according to deviation.
555
666
Cycle action is performed according to deviation.