To Next PageTo Next PageWhy is the scanned document blank when using my Panasonic KV-S1015C Scanner?
If the scanned document is blank when using your Panasonic Scanner, it's likely because the document was loaded upside down. Load the document correctly.
Why is the color of the scanned document different from the original when using my Panasonic Scanner?
If the color of the scanned document is extremely different from the original when using your Panasonic Scanner, the settings of the computer monitor are wrong. Adjust the computer monitor settings.
How to troubleshoot if the ready indicator does not light on my Panasonic Scanner?
Scanning Specifications| scanner type | Duplex Sheet Feed Scanning |
|---|---|
| scanner technology | 1-Line CIS (Contact Image Sensor) |
| scanning speed | Up to 20 ppm / 40 ipm (Binary 200 dpi) |
| resolution | 100 - 600dpi (1dpi step) |
| optical resolution | 300/600dpi |
| automatic detection | Ultrasonic Double-Feed Detection |
| image output | Binary, Grayscale, Color, MultiStream (Color & Binary or Gray & Binary) |
Document Handling| document size (ADF) minimum | 1.9 in. x 2.8 in. (48 mm x 70 mm) |
|---|---|
| document size (ADF) maximum | 8.5 in. x 100 in. (216 mm x 2, 540 mm) |
| weight/thickness single | 11 lbs. - 55 lbs. (40 - 209 g/m²) |
| automatic document feeder capacity | Up to 50 sheets (20 lbs., 80 g/m²), 3 hard cards (ISO 7810 ID-1) |
Power| power requirement | AC 100 - 120 V 50/60 Hz, AC 200 - 240 V 50/60 Hz |
|---|---|
| power consumption scanning mode | 17 W or less |
| power consumption idle mode | 4.5 W or less |
| power consumption sleep mode | 1.6 W or less |
| power consumption power off mode | 0.3 W or less |
Operating Environment| operating temperature | 50 °F - 95 °F (10 °C - 35 °C) |
|---|---|
| operating humidity | 20 % RH - 80 % RH |
| storage temperature | 32 °F - 104 °F (0 °C - 40 °C) |
| storage humidity | 10 % RH - 80 % RH |
Weight and Dimensions| width | 11.9 in. (303 mm) |
|---|---|
| depth | 7 in. (177 mm) |
| height | 5.4 in. (137 mm) |
| weight | 5.9 lbs. (2.7 kg) |
Explains critical safety symbols and general warnings for safe operation.
Details essential safeguards to prevent hazards during operation and maintenance.
Explains the function of the Red and Green LED status indicators.
Details the operation of the Power, Skip, and Start/Stop buttons.
Removing documents from the feed tray and opening the ADF door.
Specific instructions for pulling jammed documents from the feed or exit areas.
Procedure for securely closing the ADF door after clearing a paper jam.
Turning off power, opening the ADF door, and opening the roller covers.
Using roller cleaning paper to clean all types of rollers effectively.
Ensuring all roller covers are securely closed after cleaning.
Instructions for cleaning double feed prevention, conveyor, and exit rollers.
How to reset the roller cleaning counter in the User Utility software.
Instructions for cleaning the scanning glass and reference areas.
Procedure for removing dust from the double feed detectors using a cotton swab.
Step-by-step instructions for replacing the paper feed and double feed prevention rollers.
Procedure for removing the existing double feed prevention roller.
Instructions for fitting the new double feed prevention roller correctly.
Securing the cover after replacing the double feed prevention roller.
Accessing the paper feed roller mechanism.
Procedure for removing the existing paper feed roller.
Instructions for fitting the new paper feed roller correctly.
Securing the cover after replacing the paper feed roller.
Resetting the roller replacement counter in User Utility after replacement.
Solutions for scanner not powering on or not being recognized by the computer.
Troubleshooting slow scan speeds and scanning not initiating.
Remedies for frequent double feeding and paper jams.
Addressing issues like skewed images, blank scans, and lines on scans.
