8. Use the roller cleaning paper to clean the surface of the free rollers (A).
• Wipe the rollers from one end to the other (in the direction of the arrow) all the way around them, as
shown in the illustration.
9. Close the ADF door.
• Push both sides of the ADF door down slowly until it clicks into place.
10. Reset the roller cleaning counter in User Utility to 0.
• Turn ON the scanner power.
• Start User Utility, and in the window, click the [Clear Counter] button for "After Clean Roller" to reset
to counter to 0.
• For details, refer to the User Utility help.
32 Operating Manual
Care and Maintenance
To Next Page
Loading...
