Starting the Scanner Applications Automatically
The scanner application can be configured to start automatically when pressing the Start/Stop key, and/or
placing documents on the feed tray. To accomplish this, follow the steps below.
Setting the event
1. Click [Start], and then click [Control Panel].
2. Select your scanner in the [Scanners and Cameras], and then display the scanner property dialog box by
right clicking on the scanner icon.
• In Windows Vista, select your scanner in [Scanners and Cameras Properties], and then display the
scanner property dialog box by clicking [Properties] button.
• In Windows 7, select your scanner in [Devices and Printers], and then display the [Scan properties]
dialog box by right clicking on the scanner icon.
3. Click the "Events" tab.
4. Select an event in the "Scanner events" list. The selected event activates a scanner application.
• The following events can be selected.
"Feeder Loaded" An event occurs when placing documents on the feed tray.
*1
"Start Button" An event occurs when pressing the Start/Stop key of the scanner.
*1
When the scanner is in Sleep mode, press the Start/Stop key to return it to Ready mode.
12 Operating Manual
Operation
To Next Page
Loading...
